banner ad
banner ad
banner ad

Reviews

Original Direct Heat Reball Jig / Station

Introduction : Original Direct Heat Station   This is the original Directly Heated Reball Jig / Station, its small Compact design makes its use a doddle to use although its build feels a little less sturdy than the 2012 Edition With Handles The Clamping System like the Old Blue Non Direct Heat we looked at [...]

LiYang / LY RD90 Reball Station 90mm

Introduction : RD-90 By LiYang   This Station only comes in 90mm size but features a uinque Spiral Mechanism to release the central holding clamp system Made from Aluminium & Coated in shiny Blue it really does look the part, This Station Also features A height adjustment Screw to lower and raise the chip   [...]

Original Reball Station With Handles 90mm

Introduction : Blue Handles Type O.E.M   This is the original Non Direct Reball Station Availble in 80mm and 90mm this was the station everyone was using back in 2010/2011 but with the advent of the newer RD90 & HT90 its starting to feel a little outdated, The Build is strong enough and features springs [...]

News

Intel Broadwell & Skylake to use BGA Package

  Intel seems to be more focused towards the mobile sector and is planning to ditch the LGA package with 14nm Broadwell as reports from cnbeta confirm that the chip will use BGA package. Intel Broadwell would be the next generation SOC (System-On-Chip) which will use the 14nm architecture fusing both the CPU and GPU along [...]

BGA Reworking tutorial, Thoughts from the BGA store U.S.A

by theBGAstore USA » Fri Oct 26, 2012 3:44 am This material has been put together after numerous hours of research and experimentation plus the tracking of repair jobs in order to reach a better process, that delivers a longer lasting repair at the best possible cost. Several skilled individuals collaborated with their opinions based [...]

China International Exhibition and Forum on Solid State Lighting: New Venue Spells Out Bigger Prospects

  The China Solid State Lighting Alliance (CSA) recently announced that the China International Exhibition and Forum on Solid State Lighting (China SSL) will this year be held for the first time in Guangzhou, following a successful run in Shenzhen. SSL China is one of the largest solid lighting events dedicated to the entire industry [...]

Latest Products

LiYang / LY RD90 Reball Station 90mm

Introduction : RD-90 By LiYang   This Station only comes in 90mm size but features a uinque Spiral Mechanism to release the central holding clamp system Made from Aluminium & Coated in shiny Blue it really does look the part, This Station Also features A height adjustment Screw to lower and raise the chip   [...]

2012 Edition Reball Station With Handles DH

Introduction : 2012 Edition With Handles DH   This Reball Station is the first of the Direct Heat Varieties and is the newest jig in the Direct Heat range, It features handles and a unique Securing Mechanism via rotating the handles it holds the stencils via 2 magnets that clamp onto the side of each [...]

RD-90 BGA Reball Station Review

Rework Tools

2012 Edition Direct Heat Reball Station

This Station Was Launched Early in 2012 it features Sturdy Handles Which Double As the Tightening Mechanism For the Central Chip Holding Plates, The Top Has 2 Magnetic Clamps Which Hold The Stencil On Securely , In our tests It Felt Comfortable to use Held the Chip Well With Clamping system & Came 1st in [...]

Top Tips

Some General Guides for BGA Reballing

BGA devices are sensitive to the affects of moisture absorption.  Proper baking according to industry moisture senstive device (MSD) guidelines is critical to ensuring re-balling and subsequent BGA rework success. Ball Grid Array Rework Station Turn on the oven and preheat to 350� Fahrenheit (176 degree Celsius). Allow approximately 20 – 30 minutes for temperature [...]

Playstation 3 Reflow Courtesy of Friends over @ Podchip.com

Courtesy of Friends over at Podchip

Miscellaneous

PCB Support Systems Are They Really Needed ?

How to Turn a Point and Shoot Into a Night Vision Camera

  Over at Instructables, there’s a sweet little DIY project that can turn any ‘ol point and shoot into a night vision camera. The secret is adding more infrared. Which isn’t much of a secret, I guess. The DIY night vision camera does require some drilling and soldering, so it’s not for amateurs, but the [...]

Other Recent Posts

Bauer BGA Omega XD

| June 29, 2014 | 0 Comments

BAUER BGA OMEGA XD is now available @ the BGA store!  The most innovative and feature packed rework station to date has come! This station has so many unique features over our rivals. The Reworking will never be the same again!  

Continue Reading

7″ LCD Separator Machine Glass Screen Removal

| November 23, 2013 | 0 Comments

Professional 7″ LCD Separator Machine Glass Screen Removal    Brand new LCD separator machine. Use this machine to separate the broken glass from LCD display assembly so you can reuse the LCD. The unit heats heat up the screen assembly to loosen the glue that holds the glass and LCD panel together so you can remove [...]

Continue Reading

the BGA store Worldwide Suppliers of Electronics Repair Tools

| December 6, 2012

the BGA store Ltd | The Original Dedicated BGA superstore Since 2008   Since Late 2008 the BGA store has been shipping Electronics repair tools Worldwide, We Have Pioneered & Created Products Used By Many Repair Centres Including the Bauer IR PRO SCC V4 Rework Station & Soon to be Released Omega XD,  We Have [...]

Continue Reading